Top and cabinet parts is composed of screw, 3 x 8 mm motor control unit sleeve, cord support (2) harness channel, side front bracket, console retainer screw brace, transport switch, pressure screw, grounding bumper (2). Door and latch parts parts are bellow frame, door front assembly trim ring, outer door screw clamp, support screw glass, door screw clamp, glass (2) lock, door. Control panel parts parts include user interface microcomputer, machine control console knob, control harness, wiring (upper main) (includes item 39 on page 1) screw channel, water seal, user interface screw, 8-18 x 5/8 brace, top front. Dispenser parts components are dispenser, complete hook, drawer handle, drawer hose, valve to dispenser (3) clamp, hose (6) medallion valve, water inlet (double) valve, water inlet (single) nozzle, inlet (3) hose, dispenser to tub. Pump and motor parts parts are bolt, motor motor, drive clamp clamp, drain hose hose, tub to pump harness, motor ball hose, drain (inner) cap, lock foot foot, rubber (slider). Tub and basket parts is composed of gasket, tub clamp, vent hose negative thermistor control screw shock absorber (3) screw, rear counterweight (3) nut, pulley pipe, ventilation seal, rubber crosspiece asm. Optional parts (not included) is composed of paint, pressurized spray (12 oz.) (white) paint, bulk (1 qt.) (white (uncut)) affresh odor remover paint, touch-up (1/2oz.) (white) paint, pressurized spray (12 oz.) (primer,grey) stack kit drain extension.
What is the Whirlpool Duet Washer WFW9150WW00 tub capacity?
Tub Capacity as per Manufacturer Specifications (in cubic feet):
The manufacturers began using cubic feet capacity numbers only recently.
Previously, they used relative terms such as "Large" or "Extra Capacity" or laundry weight (e.g. "16 lbs per load")
which did not take into account different fabric weight and volume. Others referred to capacity in
terms of water used. Even washers available today do not have capacity written in the manual because the same manual
can be used across multiple models. Once the washer is no longer sold, the sales literature is discarded
and capacity information often lost.
Analyzing washers and their components, searching through old technical information and sales literature, and
determining their capacity is a labor intensive and time-consuming task and we are far from finished.
A small charge will help us continue our research.
Consider this: if you were to spend more than four minutes looking for tub capacity on the internet, you
would be earning LESS than minimum wage.
Calculate Washer Tub capacity
This is a geometric method to calculate tub capacity based on the cylinder volume formula.
Unfortunately, the value could be as much as 25% off from the manufacturer stated capacity.
Why? Because the tub is not exactly a cylinder. The edge where bottom connected to the wall
is not at 90 degree angle but smooth and rounded. The water line is not clearly marked and
the bottom is not always flat. Finally, an agitator also takes capacity away from the tub.
This method can be used as a crude estimate but we do not recommend using it for comparisson
when shopping for a new washer.
Determine your washer tub capacity by taking two simple measurements:
1. Use the ruler to measure the depth of the tub (indicated by the red line on the diagram)
2. Now find the distance accross the tub, the diameter (the green line on the diagram). Note that some tubs are narrow
on top. In this case make the measurements INSIDE the tub.
Tub Depth: in. Tub Diameter: in.
The Whirlpool Duet Washer WFW9150WW00 tub capacity is ... cubic feet.